Description
Patch measures approximately 2.5 inches wide and 2 inches tall
100% embroidered patch featuring an Azalea Sphinx Moth from my original illustration
This is an iron-on patch. This may also be sewn on; I recommend ironing the patch on first so it stays in place during sewing. Please see below for instructions.
$1 from each patch purchase goes to NJ Audubon.
Shipping:
United States:
All items ship via USPS First Class Mail. Priority Mail is available at checkout.
Canada:
All items ship via USPS First Class Mail International.
Iron-on patch instructions:
Iron-on patches work best on cotton and polyester. They can damage other fabrics such as nylon, rayon, and other synthetics. If you’re unsure, sew on the patch.
1. Wash fabric. Do not use fabric softener.
2. Remove any water from the iron and turn off the steam setting. Set the iron to the cotton setting.
3. Lay your garment out on a hard, heat tolerant surface (a padded ironing board may not be hard enough; you may want to place an additional board on it).
4. Place the heatseal side of the patch onto the fabric in the desired area. Iron the patch for approximately 30-60 seconds, applying pressure. Do not move the iron side to side as this may cause the patch to shift. Heavier fabrics may require more time, and lighter fabrics may require less time.
5. Allow time to cool, then make sure the entire patch has adhered to the fabric. If anything is still loose, reapply heat for 20-30 seconds and allow to cool.
6. Turn the garment inside out and apply the iron to back of the patch area for approximately 30 seconds. Wait 48 hours before washing, and turn garment inside out when doing so.
